• Attach to the sides of both pair of rack combination rails
• Requires no front rail mounting
• Front & rear lip folded for extra strength
• Weight load tested (RFVS2426BK1) to 350 pounds!
• Versatile design - can be used as shown (easy to install) or upside down (front & rear lip become equipment retainers)
• Heavy duty, 14 Ga. steel construction
• Sides folded up for easy hardware installation from above
• Sides are slotted for easy adjustment with most rail depth locations
• Rugged textured powder paint finish
• Includes all mounting hardware
• If used with square hole rails you will need to order P/N CPRSA rail adaptor for each shelf ordered.
• MOUNTS ON TWO PAIR OF PANEL RAILS (FRONT & BACK)

• Attach to the sides of both pair of rack combination rails
• Requires no front rail mounting
• Provides a sturdy shelf without obstructing upward heat movement
• Front & rear lip folded for extra strength
• Weight load tested (RFVS2426BK1) to 350 pounds!
• Versatile design - can be used as shown (easy to install) or upside down (front & rear lip become equipment retainers)
• Heavy duty, 14 Ga. steel construction
• Sides folded up for easy hardware installation from above
• Sides are slotted for easy adjustment with most rail depth locations
• Rugged textured powder paint finish
• Includes all mounting hardware
• MOUNTS ON TWO PAIR OF PANEL RAILS (FRONT & BACK)

• Attaches to the side of both pairs of rack combination rails (see drawing)
• No obstruction to front panel space or equipment
• Requires no front rail mounting or front rack space
• Vented to provide a sturdy shelf without obstructing upward heat movement
• Heavy duty, 14 Ga. steel construction
• Rear lip folded up for extra strength & acts as a rear equipment retainer
• Rear lip is covered with a rubber channel to avoid equipment scratching and cable chaffing (see drawing to the left)
• Includes two equipment stops which can be fastened anywhere on the shelf (#5 in drawing to the left)
• Sides folded up for easy hardware installation from above
• Sides are slotted for easy adjustment with most rail depth locations
• Rugged textured powder paint finish
• Includes all mounting hardware
• MOUNTS ON TWO PAIR OF PANEL RAILS (FRONT & BACK)

• Uses 1U (1.75") of rack space
• Adjustable mounting depth
• Choice of unvented or vented versions
• 14 Ga. steel construction
• Finished in a rugged textured powder paint finish
• Weight load tested to 75 pounds.
• Includes all mounting hardware
• MOUNTS ON TWO PAIR OF PANEL RAILS (FRONT & BACK)

• Shelf can be used as a permanently mounted support shelf or as a pull out chassis
• Will also accept type "RSLIDE" equipment slides (see below) for pull out applications
• 18-gauge steel shelf and 14-gauge brackets
• Weight load tested (RASC1922WH2) to 85 pounds.
• Shelf is 16.8” wide and 0.5” high
• Finished in a smooth white powder paint for high visability
• Includes all mounting hardware
• MOUNTS ON TWO PAIR OF PANEL RAILS (FRONT & BACK)

Product Literature

View at Hammond site

Additional Info

View at Hammond site